Technical Solution of Qingdao Parking System and Gate System

Introduction of Parking System



This system is generally composed of system server, management station, entrance control machine, exit control machine, entrance gate, exit gate, image contrast equipment, system management software, smart card issuer, RS485 communication card, induction card and so on.



1. Management center: management station, server, card issuer, management software, communication card and other components.



2. Entrance control system: control box, controller, optical transceiver, ground sensor processor, power supply, wire and other components. Road gate:



Main engine and brake rod of sluice.



3. Export Control System: Control Box, Controller, Optical Transceiver, Ground Sensor Processor, Power Supply, Wire Material, etc. Road gate:



Main engine and brake rod of sluice.



4. Image capture system: camera, lens, camera post, supplementary light, video card, power supply and other components.



II. Network Management of Entry and Exit



This system only needs to connect the three entrance and exit management systems of the research institute, and can be managed by a common database to form a multi-entry and multi-exit parking management system, which is very convenient. The whole system effectively integrates the parking spaces in the central and western districts of the Academy into a large parking system, which can flexibly allocate parking spaces according to the parking time and special circumstances.



III. Layout of entrances and exits



1) The equipment in the Gangting Management Office is composed of management computer, induction card controller, intercom host system and operation desk.



2) Management of computer capture of vehicle entry and exit records, temporary card distribution, inquiry of vehicles, personnel entry and exit records and other functions.



3) Fixed vehicles can be identified by long-distance card reader, and with high-speed gate, fixed vehicles can pass quickly without parking, which greatly improves the passing rate of vehicles during rush hours.



4) Adding temporary vehicle waiting areas so that temporary vehicles can pass during rush hours and need to change certificates and other matters, resulting in traffic jams.





4. Automatic Control System of Traffic Light



1. Set up the green light control system at the entrance and exit respectively, that is, when a car enters the entrance, and if the traffic light at the entrance is green,



At this time, the exit traffic lights turn to red lights, while the exit vehicles wait in the waiting area. When the vehicles fully enter the garage, the exit traffic lights turn to green lights, and the exit waiting for the vehicles to leave the garage passage. At this time, the ground entrance traffic lights show as follows




The red light signal indicates that the underground vehicles are going out, while the entry vehicles are waiting in the waiting area. When the exit vehicles are completely out of the garage, the above-ground entrance traffic lights turn into green lights and circulate in turn.



2. Set two sets of open coils at the center of the ramp, as shown above: when entering, the vehicle enters, the exit traffic lights turn red, and the vehicle enters.



After 4,5 coils in turn, the exit gate lifting pole, the exit traffic lights will turn green when the vehicle enters the parking lot completely; when the vehicle exits, the entry traffic lights will turn red, the vehicle passes through 5,4 coils in turn, the entry gate lifting pole, and the entry traffic lights will turn green when the vehicle exits the parking lot completely.



3. Set up long-distance (1-20m) card reading system at the entrance and gate at the entrance respectively. When the entrance is green light,



When the exit is green light, the exit vehicle opens the gate by reading the card at a long distance.



4. If the entrance is a red light, the reading card entrance does not lift the pole if there is a vehicle coming in at this time; when the exit is a red light, if there is a vehicle driving at the exit.



Out, at this time the export card reading, the exit is not lifted pole.





5.5) Foreign vehicles without cards can not open the gate to enter the parking lot. If you need to enter, you should open the gate by remote control through the guards.



Get into.



1. Fixed car owner admission



Fixed car owners will equip each car with a solar energy anti-disassembly mother card box, insert the IC card used by their original access control system into the mother-child card box when entering and leaving, press the ground-sensing coil when driving to the entrance lane, the camera will automatically capture the picture, and will be recognized by the remote card reader. The remote card reader will activate the security of the vehicle when there is a vehicle in the lane through infrared scanning. The mother-and-child card box works and sends IC card information. The card reading distance is long and the card reading information is accurate. If the card reading is effective, the gate will automatically rise and the car owner will automatically close the gate after driving in. If the card read is invalid, the gate will not be opened.



2. Temporary car owner admission



The owner drives the car to the waiting lane, collects the temporary card from the duty room, swipes the card at the ticket box position, hears a "beep" sound, the gate opens automatically, the owner drives in, and the gate closes automatically.



6. Exit Workflow



1. Fixed car owner appearing



Fixed car owners will equip each car with a solar energy anti-disassembly mother card box, insert the IC card used by their original access control system into the mother-child card box when entering and leaving, press the ground-sensing coil when the car drives to the exit lane, the camera will automatically capture the picture, and start the remote card reader identification, the remote card reader will activate the vehicle when there is a vehicle in the lane through infrared scanning. The mother-and-child card boxes are installed to work and send IC card information. The card reading distance is long and the card reading information is accurate. If the card reading is effective, the gate will automatically rise and the car owner will automatically close the gate after driving out. If the card read is invalid, the gate will not be opened.



2. Temporary car owner admission





The owner will drive the car to the waiting lane and return the temporary card to the duty room. After the security personnel confirm the relevant matters, the security personnel will swipe the card at the ticket box position and listen to a "beep" sound. The camera will take pictures. At the same time, the gate will be opened automatically. The owner will drive out and the back gate will be closed automatically.



Introduction of Hardware Equipment



(1) Entry and exit control chassis



Parking lot control chassis is made of 2.0 thick steel plate. The surface is made of automobile paint. It is durable and does not fade.



Standard ticket boxes adopt industrial shape, wide screen design, simple and clear lines and corners, which are handsome.